loading
VDO

OUR MOST COMPACT HOME LIFT


Artico 4000 is the smallest and most compact homelift in our product range 
and on the market. The lift has been designed to meet all requirements for comfort, space and design. The lift is available in several different sizes, with an option to personalize it with details such as glass walls, a range of varied 
colours and different materials


Data sheet

Brochure
Faceplate panel

The faceplate panel in anodized aluminum (chemically polished) gives a soft finish to the platform. To prevent any trapping, a safety list is mounted behind the faceplate panel which cuts off the security circuit when pressed down.
Alarm button

Alarm button A standard alarm button is always delivered with the lift. When it is pressed a buzzer sounds. This is only a signal to the user that the button is pressed. The alarm button may be connected to an external alarm sounder or an autodialer.
Destination buttons

Destination button with background lit frame, which indicates when the button is pressed down (green light). There are no signs on the destination buttons, instead it is possible to have your own text above the destination buttons on the destination panel
​Emergency stop button

Button in “mushroom” type for emergency situations. Is always included as standard.
Key switch on platform

Key switch placed on destination panel. The key switch locks the platform functions and prohibits unauthorized use. One key switch per platform can be provided. The key switch can be serial connected to all destination buttons or the key switch is connected to one destination button. Two brands to choose from:

• ASSA (Nordic markets only). Aritco only delivers the housing, Aritco does not deliver the locking cylinder.
• Telemecanique Can be ordered as option.
Full height wall
The platform is in its basic execution delivered with a side wall (full height) including the destination panel. It comes with LED lightening and a mirror covering the panel over the destination panel as standard. The panel under the destination panel and the small roof over the mirror is painted in RAL 7042 (grey) as standard, but can be painted in any RAL colour as an option.


Mirror
Mirror 800 x 970 mm is included as standard.


Foot box
As an option a special plate with a niche can be ordered for the bottom part of the platform. The niche adds a little bit of extra room at the bottom of the platform panel. Size of niche: Depth 80 mm, height: 197 mm, length: 456 mm.

การสื่อสารภายในลิฟต์เมื่อมีเหตุขัดข้อง

​Autodialer

Equipment for emergency calls. Integrated on the destination panel. Dials automatically when the alarm button is pressed. When unanswered after a predefined time, the call is automatically forwarded to the next number. The autodialer can be equipped with a GSM module. Aritco does not supply SIM card.
 
Phone (optional)

​The telephone work as a standard telephone  but is intended for emergency calls. The phone is  mounted on the platform panel. Equipped with redial  memory, mute button and a lamp indicator for on/off.  Can be equipped with a GSM module. Aritco does not  supply SIM card.
DC converter (optional)

When more autodialers are connected in series on one phone line the power on the phone line is not enough to drive more than one autodialer. In this case, a DC-converter is needed for each lift. The DC-converter 12-24 V is used as external power supply for the autodialer.

Platform lift


Aritco platform lift can choose open the door in 3 direction to suitable with any house in 3 side as follows

THE DOOR


THE DOORS ARE MADE OF TOUGHENED GALVANIZED STEEL AND LAMINATED AND TOUGHENED GLASS WHICH IS 8 MM THICK FOR THE FULL HEIGHT AND HALF HEIGHT GLASS DOOR, AND 17.5 MM THICK FOR THE DOUBLE-HINGED GLASS DOOR. THE DEFAULT DOOR COLOR IS RAL 9003 (ARITCO WHITE),BUT ANY OTHER RAL COLOR CAN BE SELECTED AS AN OPTION. THE DOOR FRAME AND DOOR BLADE CAN BE PAINTED IN THE SAME COLOR OR THE FRAME IN ONE COLOR AND THE BLADE IN ANOTHER COLOR. FOR THE SAME LIFT ALL DOORS MUST BE PAINTED IN THE SAME COLOUR.
The door Full height

Dimensions 900x2000
Left or Right
Glass color: Clear, Frosted, Toned or Dark
RAL profiles: Yes, No or White
View: A,B or C
Access floor door: Yes or No
Profiles: Old or New
Series: Prime or Living
Opener or handle is not included
Length of platform: 805, 1280, 1480, 1580 or 1980
Width of plattform: 900, 1000 or1100
Double-hinged (optional)

Opening Width and Height needs to be specified
RAL painted
Glass color: Clear, Frosted, Toned or Dark
RAL profiles: Yes, No or White
View: A,B or C
Access floor door: Yes or No
Profiles: Old or New
Series: Prime or Living
Opener and door handle is not included
Length of platform: 805, 1280, 1480, 1580 or 1980
Width of plattform: 900, 1000 or1100
Haft height door (optional)


Dimensions 900x1100
Left or Right
Glass color: Clear, Frosted, Toned or Dark
RAL profiles: Yes, No or White
View: A,B or C
Access floor door: Yes or No
Profiles: Old or New
Series: Prime or Living
Opener and handlel is not included
Length of platform: 805, 1280, 1480, 1580 or 1980
Width of plattform: 900, 1000 or1100
You can choose manual door opener or automatic door according to your style.

Internal door opener
Opens and closes the door automatically. It is built into the door frame and can't be seen from  the outside. Can be ordered as option. Standard for double hinged glass doors.

Internal door closer
Closes the door automatically after a preset time. It is built into the door frame and is invisible form the outside. Includes function to keep door open until the user manually closes the door. Standard for all doors except large glass doors with 50 mm frametop.
Door handle

The handle in anodized aluminum with a straight shape as standard. Available in stainless steel as an option. Note that the door handle on a door on B-side of an Aritco 4000 could hit the building wall if the lift is installed very close to the wall on A or C side. This is since the door on the B-side does not have a door frame.
​Door faceplate

The door faceplate can be placed directly on the door frame or externally in an external call station box. The door faceplate is painted in the same colour as the door frame. Standard colour is RAL 9003 (Aritco white), if the door frame is painted in another colour the faceplate will be painted in the same colour.
Landing indicator

Digital display positioned at the door frame. It shows which floor the lift is on at the moment. The landing indicator can also show following system information:
• Warning if the lift batteries are low.
• A bell when the alarm button has been pressed.
• Number of starts and total run time since installation or since last reset.
• A weight symbol will appear if the lift is overloaded.
• If connected to the buildings fire alarm a "Fire" symbol will be shown when alarm is activated.
 
External door control – placed away from lift

Door control placed away from the lift in an external call station box connected to the lift via a cable or as a radio controlled call button without any cable. For Aritco 4000 when having a door on the B-side there is no frame and thus no place for a door faceplate. Standard solution for the B-side on Aritco 4000 is to have the call button in a white plastic box. It is also possible to have an external call station box. Both connected to the lift with a cable. Note that for double hinged glass doors there is no place for door control in the door frame. External door control must be used.
Remote control
 
A remote control is connected to the destination buttons on the platform. Instead of pressing the destination button on the platform the button on the remote control can be pressed (hold to run). Remote control with 2 to 6 buttons, with numbers 2-6. One remote control per lift. One receiver per two floors. Can be ordered as an option.
Numeric Key Lock
 
The mumeric key lock can be used to add simple  security without a key. The numeric code can be programed from 4 digits to 10 digits and can be  re-coded anytime. It can be ordered as options by replacing the call buttons or the destination  buttons.
Threshold and ramp.


Threshold and ramp For all lifts without a pit a door threshold in oak is delivered with the lift. A ramp can be delivered together with the door threshold for easier access to the lift. The ramp is made of galvanized steel, painted in RAL 9003 (Aritco white) as standard. If the shaft is painted in another RAL colour the ramp will be painted in the same colour. Can be ordered as an option. It is also possible to order the threshold plates in corrugated aluminum instead of oak. In this case a ramp in galvanized steel covered with corrugated aluminum can be ordered as an option for lifts without a pit. A threshold will not be delivered in this case. Door - Aritco 4000 and Aritco 6000 Cover plate If the door control is placed externally and not on the door frame a cover plate that covers the hole in the door frame is delivered with the lift. The cover plate is always delivered with the lift in the same colour as the door frame. Standard colour is RAL 9003 (Aritco white).
Arrival gong (optional)


The arrival gong gives an audible signal (ding dong) when the platform arrives at each landing. It is placed in the door frame on each landing. Can be ordered as an option.

DRIVE

Screw and Drive nut

Roll pressed steel – guarantees the quality The nut is turning – not the screw Safety: 8 times the maximum load. Self locking concept. No additional motor brake is necessary. Vibration reduction due to a patented nut design. If maintained correctly, no oil waste due to our lubrification system 40 mm screw
Power supply

Power supply: 1-phase 230V 50Hz/6.6A/16A slow
Emergency lowering: Battery-powered
Control voltage: 24 V
Motor: 1.5 kW
For more information, please, refer to our product catalogue or visit
our website.
Due to the continuous product development at the company, the
information may change without prior notice.
Lubrication The screw must be oiled at regular intervals.

Manual Lubrication. A brush fixed to the platform oils the screw when using the lift (a tray with lubrication oil in the bottom of the shaft). Standard for Aritco 7000. Automatic Lubrication. Oils the driving screw at regulated time intervals even if the lift is not in use. The lubrication frequency is adjustable. Standard for Aritco 9000. Option for Aritco 7000. Standard for lifts with a travel height of over 8000 mm. Recommended for lifts that are seldom used or that are not used regularly to travel from ground to top floor
Battery operated emergency lowering

All Aritco lifts have battery operated emergency lowering as standard. You can lower yourself from inside the lift and get out by yourself when there is a power failure. Possible to run the lift to nearest level from the platform/cabin (possible to go down)
- Executed when pressing a platform/cabin button. Can also be run externally from the call button (hold to run) or service box.

​SHAFT

The Strength of Aritco lift that can be different with others.
- Up to 13 m travel height with maximum of 6 stops
- Most efficient space utilization
- Choices of panoramic glass or solid shaft panel on three sides
- Compliance with European safety standards and regulations
- Patented screw drive system to ensure owner's safety and comfort.
- Simple, compact and easy to install (less than 1 week) anywhere - indoor/outdoor
- Require little or no modification to existing building
- Up to 11 available platform sizes
- Only 21.5cm thick mechanical shaft
- Only 1500 watts to operate the lift, 10 watts when standby
- Built-in back up electrical and mechanical lowering systems in case of power failure
- No separate machine room or special built structure needed
- Built-in 5 emergency stops system to ensure extra safety.
- No extra head room or pit required

Flooring

Vinyl, rubber or simply no flooring at all. Choose between following options:
Standard:

Paint color

Standard wall laminate for machine side is black with small embossed dots. For the other walls, where there are no doors standard laminate is white grey. As an option you can chose from a range of different laminates in different colours. Choose the same colour for all cabin walls or choose one colour for the machine side and another colour for the remaining walls.

Related Portfolio

Top